iPhone White Screen of Death, If your iPhone shows a white screen? Try these five tips to fix the problem.
If your iPhone’s screen is entirely white and isn’t displaying any icons or apps, you may be challenging the infamous iPhone White Screen, aka the iPhone White Screen of Death. That name gives it sounds scary. However, it’s not as bad as it seems in most cases. Sometimes little problems can occur. It’s not as if your phone is going to explode or anything.
Solution about iPhone white screen of death
iPhone White Screen of Death rarely lives up to its name. A few steps explained in this article can usually fix it (and also can fix an iPad or iPod touch, too.see the end of the article for more information.
Causes of the iPhone White Screen of death
The iPhone White Screen can be caused by several things, but the two most common culprits are:
- Failed software update-When we are trying to update the iPhone’s operating system, and the software updations fail, sometimes you will see the white screen. This is even more common when trying to root your iPhone, and the rooting fails.
- Hardware problem-If the iPhone software isn’t the culprit, the other most common cause of the white screen is the wire that connects the iPhone’s motherboard to its screen coming disconnected or breaking. In some cases, this is simply the outcome of a hardware failure over time. In others, the connector comes loose after the phone has fallen too often.
Anyway, the cause of the iPhone White Screen of Death at your iPhone, try these steps to fix it.
Try the Three Finger Tap First
white screen problem, but there’s a small chance that you don’t have a White Screen of Death at all. Instead, you may have unexpectedly turned on-screen magnification. So, you may be zoomed super close in on something white, making it look like a white screen. In that type of case, The normal taps won’t help you.
To fix this problem, hold Triple
fingers unitedly and then use them to double-tap the screen. If your screen expanded, this would bring it back to the normal view. Turn off magnification in Settings > General > Accessibility > Zoom > Off.
The most helpful step to fix any iPhone problem is to restart the iPhone. During this case, you need a slightly more powerful restart called (a hard reset). This is like a restart, but it doesn’t require you to be able to view or touch anything on your screen — which is key if you have got a white screen that won’t respond to taps. It also clears more of the iPhone’s memory (but you won’t lose your data).
To perform a hard reset on any iPhone model. Follow these steps
- Press down both the home button and the sleep/wake button at the same moment (on the iPhone 7, hold the volume down and sleep/wake buttons instead).
- Continue pressing until the screen flashes, and the Apple logo appears.
- Allow the go buttons and let the iPhone start-up like regular.
- Hold the volume up button and let it go.
- Hold the volume down button and let it go.
- Press down the sleep/wake button until the mobile restarts. When the Apple logo appears, let go of the button.
Because the iPhone 8 has changed technology in its Home button, and because the iPhone X, XS,don’t have a Home button at all, the hard reset process is a little different. On those models:
Press Down Home + Volume up + Power
If a hardware reset didn’t work by using the upper trick, there’s another combination of buttons that works for many people:
- press down the Home button, the volume up button, and the power (sleep/wake) button all at once.
- It may take a little time, but keep holding until the screen turns off.
- Continue holding those buttons until the Apple logo appears.
- When the Apple logo shows, you can let go of the buttons and let the iPhone start-up like regular.
This only works with iPhone models that have a Home button.
Try Recovery Mode and Restore From Backup
If no one of these choices worked, your next step is to try putting the iPhone into Recovery Mode. Recovery Mode is an essential mechanism for getting around whatever software problems you may be having. It will let you reinstall the iOS and replace backed-up data onto the iPhone. To do it, you’ll need a computer with iTunes installed on it and then to follow these steps:
- Turn off your iPhone,
- Plug the syncing cable into the iPhone,
- What you do next depends on your iPhone model:
- iPhone XR, XS, X, and 8 —Hold down the Side button while you plug the syncing cable into the computer.
- iPhone 7 series —Press and hold the volume down while plugging the phone into the computer.
- iPhone 6S and earlier —Press and hold the Home button and connect the cable to the computer.
- Press holding whatever button you’re staying until the Recovery Mode screen appears (the iTunes icon with a cable pointing to it and the text Connect to iTunes).
- While the screen turns from white to black, you’re in Recovery Mode. On this point, you can use the onscreen instructions in iTunes to Restore your iPhone from backup.
- Restore your phone from back up.
Device Firmware Update (DFU) Mode is even more potent than Recovery Mode. It lets you turn on the iPhone but restricts it from starting up the operating system so that you can make adjustments to the operating system itself. This is further complex and tricker, but it’s worth trying if nothing else has worked. To put your phone into DFU mode:
- Attach your iPhone to your computer and launch iTunes.
- Turn off your phone.
What you do next depends on your iPhone model:
- iPhone 7 and up —Hold down the Side button and Volume Down button at the same time.
- iPhone 6S and earlier —Hold down the sleep/power button and the Home button at the same time.
- Press button for 10 seconds. If you see the Apple logo, you held it for too long and should start over again.
- After 10 seconds, let go of the sleep/power/Side button, but keep holding the other button.
- If your phone’s screen is black, you’re in DFU mode. If you see an iTunes logo, you need to start again.
- Follow the onscreen instructions in iTunes.
- For more about WordPress white screen